Carcassonne Big Box Storage (taller version with card holder/tower)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Version of the Carcassonne Big Box Storage which holds a card tower for a ready to play experience.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Features
Printed this amazing box as a family gift for Christmas. It can now hold all cards and expansions we have. I wanted to have a build-in card tower though to make sure we can just start playing immediately. I therefore remixed the original by increasing the box height to 76 mm (152 mm total height). It’s quite tall now but fits everything into one box.
The second scoring board has no attachments/magnets in this design, so it flies around a bit freely. I did not observe this to be an issue though if the box is properly closed.
For the needed materials (screws, magnets etc.) please refer to the original model (s. below).
Included Files
Taller version of bottom and lid (in both STL and 3mf for coloring)
Taller version of Bind and various modified versions
Cut down version of the tower, print it twice to have an easier fit. I had to shrink things a bit to make it work but it fit my 45mm cards quite well still.
Taller version of the bottom inlay.
Scoring boards with some color fixes for reference.
Print Settings
Recommend a 0.4 Nozzle with 0.2 Layer Height
Recommend to print the tower slower on the bottom and the top part and tune your bridge settings beforehand. Also use rectilinear infill at around 30%, Gyroid or other wavy patterns will make the bottom turn out less nice.
If you like what I'm doing, please give it a like 👍 or consider buying me a coffee! 😃
