Gridfinity for Fanttik B10 Dust Blower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two trays to hold the blower and accessories.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Gridfinity trays for https://fanttik.com/products/fanttik-b10-pro-electric-air-duster . The main tool is a 2x4x5 high, the tool protrudes out an additional 15 mm. The accessory tray is 2x4x3 high, but the nozzles there protrude even higher than the tool does.
If you make this, please be advised there needs some slight adjustments.
1) (accessories) the finger grip for the wide brush is a little too small to be useful. should be elongated somehow
2) (accessories) the fit for the fine brush was modelled (poorly) rather than transferred via photo; it needs to be offset about 0.2 mm out for it to work properly. It's also about 3-4 mm too long but that's not critical.
3) (main tool) the finger grip doesn't do much. It would be more ergo friendly to have about 5mm more of the tool exposed for easier grabbing.
I would do these but I've already iterated on this once and I don't want to waste more plastic or be inconsistent with my models & photos.