nighthawk-wwg2-mount for LDO Stealth Changer Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Board Mount for Night Hawk Board including cable retainer that secures the LDO cable plug and a spring steel slot.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A mounting solution for use with WWG2 extruder & Night Hawk or EBB36 toolboard, remixed from Tooks who remixed SputnikOC3D's model for the SHT36 Max.
This toolboard is designed for use within the Draftshift Design Stealthchanger project, specifically with N3MI's Umbilical V2 Spring Steel mod for cable management. See link for details: https://github.com/DraftShift/CableManagement/tree/main/UserMods/N3MI-DG/Umbilical_plates_V2
BOM (per toolhead) for this mod is as follows:
1x Tool Mount printed part
1x Clip printed part
3x M3x5x4 heatset inserts
3x M3x6 bolt (for Umbilical Plate)
This part requires no support in your slicer, there is a built-in support block that should easily remove once printed. Recommended to print with default Voron settings.
Please note the ‘Umbilical Plate’ printed part originally comes from jwellman80 on Github, which you can find here: https://github.com/jwellman80/VoronMods/tree/main/EBB36%20Umbilical%20Clip%20Mount