1 / 2
Cr-10S Pro V2 Screen Blanking Plate
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cover you can use if you want to completely remove the display
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a blank cover for the screen of the Cr10S Pro V2.
To install it, the screen has to be removed. You can reuse the original screws.
I created this as I wasn't happy with the existing options of using the screen together with Klipper. As it didn't have a purpose and was just gathering dust, I decided to completely remove it.
The model is optimised to be printed with the visible side facing up. You will not need supports as the internal overhangs will not be visible and can be printed by bridging the gap.