Hanging Lithopane Frame with Battery Pack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a hanging frame for a lithopane photo printed with CMYK multi-material. Designed it as a Christmas ornament.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed it for this battery pack: 2PCS 3 x 1.5V AA Battery Holder, 3 AA Battery Case Box Holder 4.5-5V with Cover and On/Off Switch, with USB Cable for Indoor & Outdoor Use, Wedding, Party, Camping, Birthday, Christmas (https://www.amazon.com/dp/B099P95JPH?ref=ppx_yo2ov_dt_b_fed_asin_title). I would use ribbon that you can sew with a back fold, so that you can slip it through the 2 slots (where upon pulling back it will tension and hold the frame in place).
I made it to be a Christmas ornament, but I'm sure it can also be used to hang on a wall. I used 25% gyroid infill with single layers and organic supports.
The 2 slide inserts can be customized such that you can put shapes or words in them. Do a cut extrude with a 0.25mm offset to achieve the look I have.
0.2mm layer height, 25% gyroid infill. Use paint-on supports with 0.275mm gap, for some reason without paint-on supports for the frame, it won't auto-select certain overhang features. For the words and pictures on the slide inserts, I used 1 wall, and again 0.25mm offset with a cut extrude to achieve the effect.