1 / 1
TTC 450 Ultra Y-axis 1204 BK10 mount — zdjęcie 1

TTC 450 Ultra Y-axis 1204 BK10 mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Upgrade Y-axis from 8mm leadscrew to 1204 ballscrew

Ocena
0 / 5
Polubienia
4
Pobrania
22
Wydruki
0
Wyświetlenia
146
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I upgraded the Y axis on my Two-Trees 450 Ultra CNC machine removing all the backlash from the Y-axis.

This mount was used to fasten the BK10 nut for a 1204 ballscrew of 600mm that replaces the original lead screw in the Y axis. The nut spacer is used to cover the distance from the nut to the driving beam.

Further improvement could be made by installing a second Y-axis motor +another ballscrew to stiffen the machine.

Tagi