Housing box and the lid for the DC/DC down converter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D printed box for the miniature DC/DC buck converter (step down 4.5-24V to 0.8-20V)
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 189
- Wydruki
- 3
- Wyświetlenia
- 939
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A 3D printed box for the miniature DC/DC buck converter (step down 4.5-24V to 0.8-20V) is printed on the Prusa Mini+ printer, filament material Fiberlogy PLA (orange). The outer dimensions are 32X22X9mm, the inner 28X18X7mm for the tight fit of the converter PCB board. The lid and the box are 2 separate projects for the printer, in 2 separate STL files. I use this converter to feed the power to my Ham Radio equipment. The IN and OUT wires terminated with the Anderson PP connectors. For the video on this topic please check with my YT channel at LY2H Ham Radio Van.