Clamp for True Fruits Birdfeeder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Accessory mount for the TrueFruits Bird Feeder, designed for 42 mm round balcony railings.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Balcony Railing Mount (42 mm) – Accessory for TrueFruits Bird Feeder
Description
This model is an accessory / add-on for the TrueFruits Bird Feeder available on Printables.
The mount was designed specifically for 42 mm round balcony railings and allows a secure installation without modifying the original feeder parts. The geometry was created and optimized for outdoor use and stability.
Note: This upload contains only the balcony mount. The original feeder model is required separately.
Hardware / Assembly
Required hardware:
2× wood screws – Ø 4 mm, 20–25 mm, countersunk
2× M5 heat-set threaded inserts (brass)
2× M5 screws – 20–25 mm, head type optional
Alternative (without threaded inserts):
2× M5 nuts
Use longer M5 screws if required
Assembly:
Install the M5 heat-set inserts in the printed part (or place M5 nuts on the back side)
Fix the mount using the two countersunk wood screws
Attach the feeder with the two M5 screws
Printing Recommendations
Material: ASA recommended (PETG possible)
Layer height: 0.2–0.28 mm
Perimeters: 4–5
Infill: 20% (Gyroid)
Color: Light colors recommended for outdoor use
Credits
Designed as an independent accessory for the
TrueFruits Bird Feeder by @derpw