1 / 2
GEPRC Pulsar 9 / 10 / 11 DJI O4 FPV camera adaptor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable from 10 to 40 degrees of tilt.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
The cam adaptor is printed in hard filament, such as PETG, fit M2 brass inserts
The TPU side plate adaptor has 2 walls. Unlikely to see infill as it is shelled, but I have it set to 15%.
M2 x 8 bolts and washers for the TPU sideplate
M2 x 6 countersunk for the camera adaptor into the camera.