LS1 engine bench start parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple setup to run an LS1 engine on a stand
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 414
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Share Alike
I am doing an engine conversion and needed to be able to start the motor on the engine stand.
Whipped up these parts to be able to nicely and easily mount everything to a sheet of MDF and to be able to use the 20L gas can that I had as the fuel tank.
Gas can lid needs to be printed with supports, everything else prints normally. Printed in PLA with 20% infill and 4 walls etc.
The gas can lid won't last forever in PLA but will work for as long as I need it.
The switch panel is in two parts, takes M5 inserts into the legs to allow the base plate to be screwed into it with thin flat head bolts.
Switch panel takes standard switches and has provision for an OBD port, and a charge light which is a simple bulb holder glued in, it takes a bayonet style bulb.