Band Aid Bandage Replica
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replica Band Aid bandage for prop use, to "fix" a 3D print, or join parts together in a fun way!
- Ocena
- 4,75 / 5
- Polubienia
- 22
- Pobrania
- 323
- Wydruki
- 3
- Wyświetlenia
- 1216
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi 3D printing friends! This design is a replica Band Aid I made just for fun. I had a crack on something that I didn't intend to repair and I thought this would be a funny way to cover it a bit but also draw attention :)
You can heat up the band aid after printing and shape it to the item if there is a bend or curvature which will give it a more organic look/feel.
I printed this in PLA (100% & 125% scale) but could be printed in PETG or any other material you like. It can be printed flat but resolution will suffer. I opted to print it on the long edge with a brim for layer adhesion.
Recommended Settings:
- 0.4 mm nozzle
- 0.15 layer height
- 30% infill (gyroid) if printing a scaled up version, otherwise there is no infill.
- Support isn't needed, but could help when printing on edge.
- Used a Brim for Adhesion when printing on edge.