Custom fitted Hawker Hurricane 3dLabPrint wing servo covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made some custom wing servo covers for the 3dLabPrint Hawker Hurricane. These are most useful for the version of the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I made some custom wing servo covers for the 3dLabPrint Hawker Hurricane. These are most useful for the version of the plane for belly landings. Hopefully they will protect the aileron and servo horns.
They are made in LWPLA but in a higher density mode. Pay close attention to the Prusa settings in the 3mf file. They are non-standard.
The frame pad file is only if more height between cover and servo is needed. You would need to scale in z and glue it to the wing cover.
Category: R/C Vehicles