Sierpiński fractal Christmas tree with Koch snowflake fractal topper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brighten up your Christmas with this fractal tree!
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For anyone wishing to add more Christmas cheer and fractals to their life I have the perfect solution! Print yourself a cute fractal Christmas tree with an awesome fractal topper.
Printing instruction for the tree
File: tree_with_supports.stl (just_tree.stl is added just for curiosity)
To make the printing easier I have designed special supports that are built into the model. The tree is printed upside down to remove the need for long bridges.
It is really important to prevent stringing, to that end I have dried my filament (PLA) just before printing and I have set the printing temperature to 210C (regularly I print at 215C).
Print setting I have used:
Brim: 5mm
0% infill
0.16 mm layer height
1 perimeter
0 top and 0 bottom solid layers
These result in just a single perimeter shell being printed, I found that to work best for my setup.
Print orientation as in the file, with the tree upside down.
DO NOT SCALE THE MODEL! The supports are designed for this scale and 0.16 mm layer height. Scaling might produce unexpected results.
Post processing for the tree
After printing the supports need to be removed. The tree is fairly fragile so I do not recommend using excessive force, I used a scalpel to cut the supports off.
Cut the columns in the corners. They are attached with studs to the corners of the tree as well as to the side supports, all of these studs should be cut. Remove the corner columns completely.
Cut the side supports. The triangular side supports are attached with studs to the sides of the tree. Starting from the top of the print (bottom of the tree) slide your scalpel between the support and the tree slicing some of the studs. Break off some of the side support using a layer line as a break line. Repeat slicing more studs, breaking off more support until all supporting material is removed.
Finally use the scalpel to clean the model. Be mindful that the print is only a single perimeter and so it is way too easy to cut all the way through (ask me how I know)
Layers might split in this process, don't worry, super glue can fix that easily.
Congratulations! The hard part of this project is done!
Printing instructions for the topper
File: topper.stl
Nothing special here. No supports, no brim, just default settings. No post processing either.
Assembly
Place the topper on the top of the tree. There is a hole in the topper that the tree slots into. Optionally secure with a dab of super glue. All done! Enjoy!
Larger trees
Unfortunately, as the tree is slightly inflated to facilitate printing, it is not suitable for stacking to create a larger tree. (it might be possible, but it would be somewhat off).
Let me know if you would be interested in a larger tree with a higher fractal depth. I might be able to generate another model.
Back story
I have made a tree like this many years ago out of cardboard for one of my videos (in Czech):
Acknowledgements
Although I haven't used their model, @Nat_ with their The Octahedroflake introduced me to cadquery which I have used to make this model
Slant 3D introduced me to modeled supports