Takamine TK4NT Preamp Replacement Electronics Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement housing for the Takamine TK4NT
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this model because one of the clips on my Takamine D024007 Preamp broke off and it could no longer provide enough tension to make a good connection. I designed a replacement box to get the preamp working again.
Here are a few things to keep note:
Print the model on the side so the layer lines go with the clips instead of building up the clips
Print at lower speeds; there isn't much tolerance in this print so make sure it is printed accurately
Use tree supports
Be careful when disassembling and assembling the electronics otherwise you could break some of the wires
I provided:
The FreeCAD file if you need to make any changes to the model
The SVG of the decal so you can cut out a custom double sided adhesive to add adhesive back to the decal. Example tool to use would be a Cricut machine.
A 3mf file for ease of printing
This model works well with @PiJey_88387 model of the Housing