Case for Heltec WiFi LoRa 32 Expansion Kit with Touchscreen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This case for the Heltec WiFi 32 LoRa Expansion Kit (touchscreen) protects it, adds mount points, allows use of the clip
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 160
- Wydruki
- 1
- Wyświetlenia
- 1308
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
About this Case for the Heltec Touchscreen
This case is easy to assemble, and wraps your Heltec v4 WiFi LoRa 32 Expansion Kit (touchscreen) inside a protective enclosure that provides easy access to the power and 35 buttons (wakeup button in Blackout Comms).
Update (9/16/26) - for the newer R8, make sure you use the R8 back. It leaves additional space so you can leave the heltec's aluminum back cover on and still attach a belt clip if you want. The other/older printable back doesn't leave enough space for that.
Update (8/27/26) - Added a cutout for the SD card slot in the newest Heltec R8 exp kit.
Update (1/23/26) - I would recommend printing the case front with open buttons. It's much easier to assemble than the other options I have here.
Full assembly instructions (and parts list) are attached as a PDF. Other than the Heltec, the only parts you need are 3 M2 28mm screws, some M2 nuts, and optionally M2 10mm screws if you're attaching the belt clip that comes with the Heltec.
You can confidently carry the Heltec on your belt, backpack, in your pocket, or wherever, with this enclosure.