Industrial Lamp - LIDL LED lamp redesign.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A design overhaul for a LIDL LED lamp.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
An industrial redesign for a LIDL (Livarno) LED lamp.
I already made a spare lampshade for this lamp (check my other models), but I wanted to create something more special.
Therefore I decided to give the lamp a complete design overhaul which gives the lamp a bit more industrial and completely different look. The design consists of two parts - the lampshade and the bottom part cover. Since the bottom part is actually the button to switch the lamp on and off, I made the cutout around the power cable a bit larger, so that the lamp can still be comfortably turned on and off.
To assemble this, simply remove the lightbulb and the nut which holds the original lampshade in place. First, put on the bottom cover, then the lampshade and secure both in place with the nut. To finish it off, screw back the bulb. I decided to use a filament LED bulb, to finish the industrial look.
I printed both parts using Prusament PLA (pistachio green for the lampshade and gravity grey for the bottom cover). Standard MK4S 0.20 SPEED profile with 15% infill (grid) and I used organic supports to support the overhangs in the arches at the top.
Link to the lamp itself: