Keychain Shell for Intel LGA2011 CPU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It hurts me to see people drilling holes in perfectly good CPUs to make keychains. So here's one for the LGA2011 CPUs.…
- Ocena
- 4 / 5
- Polubienia
- 11
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 646
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
It hurts me to see people drilling holes in perfectly good CPUs to make keychains. So here's one for the LGA2011 CPUs.
Print at 0.16mm layer height and 0.35 line width, with support. Preferably with a raft as bed adhesion.
Concentrical top surface skin pattern works better.
Assembly
Note the top shell is not symmetrical. Put in the CPU accordingly to the notches.
Put together with 4 M2x6mm screws with nuts.
Choose a suitable metal ring for your keychain and put it in when assembling the shells.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
Yes
Resolution:
0.16mm
Infill:
5
Filament: Generic PLA Any
Category: Keychains