SNES Controller Plug Opener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's hard to hold the four tabs on both sides of the SNES controller plug when trying to open it. Using metal tools…
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 205
- Wydruki
- 3
- Wyświetlenia
- 1464
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
It's hard to hold the four tabs on both sides of the SNES controller plug when trying to open it. Using metal tools also damages the tabs a lot. Hence this tool.
Try to put all 4 nipples into the holes, squeeze the tool inwards while trying to pull the innards outwards through the holes on the sides of the plug with a dental pick. It's brutal but I can't image it being any easier without a good tool.
Note the tabs on the stubborn side will still be slightly damaged if you look very closely. But like I said, it should be much better than metal tools.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
5
Filament: Any PLA Any
Category: Video Games