1 / 4
Exact Replacement Stove Knob for Dacor Gas Cooktop — zdjęcie 1
1 / 4

Exact Replacement Stove Knob for Dacor Gas Cooktop

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

0,60 € – 0,73 € netto (bez VAT)

Dla pliku: dacor stove knob_1_0.4n_0.15mm_PETG_COREONE_42m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,67 € netto (środek widełek).

Masa podana przez autora
8 g
Czas druku podany przez autora
42,6 min
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

30mm across, 15mm high stove knob for Dacor Gas Cooktop

Ocena
0 / 5
Polubienia
0
Pobrania
22
Wydruki
0
Wyświetlenia
131
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

Ho Ho Ho - Happy Holidays 2025.  Replace your gas cooktop stove knobs in festive colors for an added over the top decoration.   

or...

Replace your broken Dacor gas cooktop stove knob.  We tried the replacements on Amazon, but they are huge and don't point the right way when installed.  So break out 3Dbuilder and model this replacement knob. 

To print - Satin sheet recommended to get a finish similar to the original.   Print a .15 structural on Core 1.  Don't mind the VFA's in the pictures - those are just part for the course for the Core-One.  When printed on my MK4S+, they come out flawless for the same settings.  I used PETG.  PLA not recommended.  ABS or ASA or PC are probably ideal for long term wear, but PETG did fine, and the added flexibility makes the stretch over the D post on the stove valve easy.

The included .3mf file is a Prusa Slicer project - recommend you use "Open Project" instead of "import".