GDEMU Mount Button Flat & Raised Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace buttons for Collin's GDEMU mount: https://www.thingiverse.com/thing:3362309 His design used indented Dreamcast…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 516
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Replace buttons for Collin's GDEMU mount: https://www.thingiverse.com/thing:3362309
His design used indented Dreamcast logo. I felt the urge to have a raised version, so here we are.
If you are able to change filament mid-print, you can use the button with raised logo file.
If your printer is as dumb as mine, you can print the flat button and the swirl logo separated, then glue them together.
Two variations:
GDEMU Button Flat + swirl
- if you are ok with gluing the logo onto a flat surface
OR
GDEMU Button with indent for separate swirl + deeper swirl
- this should be easier to put together since the logo can sit inside the groove
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15%
Filament: Generic PLA Any
Category: Video Games