1 / 2
Heavy Duty Cutter for Neptune 4 Plus potentially Max
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A version of the Real Lango cutter for the Neptune 4 Plus and likely Max that uses Number 4 X-acto blades
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 369
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
Cutter Modified for Neptune 4 plus
The changes inclue:
Modified Arm to allow activation on the 4 Plus
A guiding hole thing to stop the blade from shifting up which is an issue I faced
Recommendations/Instructions:
The body is prone to breaking, I recommend having a spare on hand if you plan on doing larger prints
It might be helpful to add grease or something to the lever and the blade holder pieces to help them slide even better
The blade holder pieces remain the same as the original
Material selection in description of parts
Here is my cutting macro code, please use responsibly, I am not liable for damage, although I don't know how legally binding what I say is but whatever, use my macro at your own risk :3
[gcode_macro _CUSTOMCUTMACRO]
gcode:
G1 X318 Y330 F6000 ; move to cutter
G1 E-20 F500
{% set current = printer.configfile.settings["tmc2209 stepper_x"].run_current|float %}
SET_TMC_CURRENT STEPPER=stepper_x CURRENT={current*1.50} ; higher current
G4 P500 ; brief wait to let current apply
G1 X338 F100 ; cut motion
G1 X318 F6000
SET_TMC_CURRENT STEPPER=stepper_x CURRENT={current} ; normal current
G4 P500 ; brief wait to let current apply
G1 E-1 F1000
_MMU_STEP_MOVE MOTOR=extruder MOVE=40 SPEED=500