Kindle Paperwhite 5 (11th Gen) Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for the kindle paperwhite 5 (11th gen). Tight fit around the kindle and feels nice in the hand.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Kindle paperwhite 11th gen case, sample printed in Bambu purple PLA matte at 0.08mm layer height on an A1 mini.
I have printed a few device cases in PLA matte and they tend to look great, but are a bit brittle. I recommend bumping the filament temperature by 5 degrees and slowing the speed down and adding a brim- settings included in 3mf.
Additionally, the first layer was underextruded using the octogram pattern for the bottom surface, but this has not been an issue with other bottom surface patterns excluding concentric.
Note that this case is not designed for maximum protection or durability, but mostly for aesthetics -- it fits closely around the device and covers the existing color and back logo, but in PLA matte, likely would not survive being taken off the kindle.
The bottom curve requires some post processing, I scraped mine with a razor blade. Before and after pics included. You may have better luck inverting the model and printing with support, but it felt like a lot of wasted material.