1 / 5

TOADS DI6 + RPi Zero 2W Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

BBoyd

@BBoyd_455561

This is a portable box for the TOADS DI6 Digital Interface + Raspberry Pi Zero 2W produced by KM9G.

Ocena: 5 / 5
Polubienia: 12
Pobrania: 53
Wydruki: 0
Wyświetlenia: 227
Oceny: 1

Aktualizacja u źródła: 23 gru 2025

Informacje o modelu

Źródło: Printables
Kategoria: Electronics
Licencja: Creative Commons — Attribution — Noncommercial

Szczegóły Pliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (13)

Description

I just picked up a TOADS DB6 Digital Interface from Temporarily Offline (KM9G). I am in no way associated with KM9G, just needed a protective box for my TOADS. Now I wanted to add a Raspberry Pi Zero 2W and not have an extra box.

Find me @ www.K5ACP.com

Printing

I printed in PETG with 3 walls/3 tops/3 bottoms and 40% infill and it worked great, very strong. Polymaker PETG at 40mm/s first layer, 50mm/s remaining layers.

I print the box standing up and it is deigned to print without supports.

Post Processing

You will need threaded M3 inserts to insert into the box. Then use M3 screws to attach lid.

Methods

There are many ways to put in heat inserts involving solder irons and even fancy press style attachments. None of that is needed on a surface mount like this. Use this quick and easy method for pressing in heat inserts. https://www.youtube.com/shorts/iar6NPHNPfY