LED G4 Light Fixture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed these holder / fixtures for G4 12VDC LED automobile dome lights. Print using PETG…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
I designed these holder / fixtures for G4 12VDC LED automobile dome lights.
Print using PETG for best results.
The retainer ring snaps into place firmly holding the LED inside. Solder the wire leads before snapping the ring in place. The ring is removable, it just makes assembly that much easier. You can use my photos for wiring reference. They should be wired in parallel and powered by a 12VDC output source. Remember, the more you string together the higher the amperage power supply will be required or the light output will be reduced.
I use these to light my printers and work area, but they will work nicely for under cabinets, inside cabinets, behind entertainment centres or anywhere you want bright economical lighting options.
If you found this useful, please consider a SMALL DONATION @ https://www.paypal.me/shanekartz to help cover the time of design.
Please post your Makes. I would love to see how they turn out.
Thanks, Enjoy!
Category: Decor