Filament Dryer Chamber Extensions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created these cylinder chambers to make a food dehydrator into a makeshift filament dryer. I made two sizes…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I created these cylinder chambers to make a food dehydrator into a makeshift filament dryer. I made two sizes depending on how many spools I wanted to dry at one time.
Here is the dehydrator that I use: https://amzn.to/2y7Nw46
This one should also work, but you may have to slightly tweak the print size: https://amzn.to/2V0AhLs
*Important: DO NOT PRINT WITH PLA!!!
Make sure that you print out of material that has a higher heat tolerance, PETG, PEAK, Nylon otherwise they will warp from the heat the dehydrator produces. You can expect some shrinkage over time as the plastic anneals from the heat. This is normal.
This is a work in progress, so I will be making some tweaks. For instance, I will make them stackable. Currently, you can set one on top of the other, but it may shift from fan vibration and fall off depending on your machine. I can fit 4 to 5 spools in mine at one time depending on the filament brand.
If you found this useful, please consider a SMALL DONATION @ https://www.paypal.me/shanekartz to help cover the time of design.
Please Post your Makes. I would love to see how they turn out.
Thanks, Enjoy!
Category: 3D Printer Accessories