Follow Focus Speed Crank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This follow-focus speed crank works fantastic! Make sure to CA glue the knob to the handleshaft. There is a print-in-…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This follow-focus speed crank works fantastic! Make sure to CA glue the knob to the handleshaft. There is a print-in-place ball bearing inside the crank lug. I recommend printing the threaded handleshaft vertically using a super wide brim. Also print the knob vertical with the opening on the bed with a super wide brim. I would also recommend using a bit of light lubricant when threading in the shaft to the lug as it is a snug fit. Print the crankshaft horizontally as it is in the file. Use a raft and supports. This will be the strongest orientation and allow the ballbearing and threads to work well.
If you found this useful, please consider a SMALL DONATION @ https://www.paypal.me/shanekartz to help cover the time of design.
Please Post your Makes. I would love to see how they turn out.
Thanks, Enjoy!
Print Settings
Printer:
Creality CR-10
Rafts:
Yes
Supports:
Yes
Resolution:
.1
Infill:
50-80
Notes:
Print with high infill.
Raft and supports on the crankshaft.
Category: Camera