Aqara slide in sensor or button mount (fully parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Although there are already many variations of this kind of mount this one is completely parametric.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Although there are already many variations of this kind of mount this one is completely parametric. Just open the file in freeCAD and change all the the parameters you need.
The hight/dimensions of the exported step file fit the Aqara button with the double sided tape (unpeeled) on the back. By adjusting the dimensions in freeCAD it should also be very simple to adapt this to the vibration sensors or similar shaped other things.
I printed in in PLA with .2 layers and 15% infill, basically the default profile.
//Update: Added a hole for pushing the button out and tightened up some dimensions