Aquacomputer Ultitube spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This spacer is designed for mounting an Aquacomputer Ultitube reservoir to its original bracket.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Aquacomputer Ultitube Mounting Spacer
This spacer is designed for mounting an Aquacomputer Ultitube reservoir to its original bracket.
It creates the required distance between the Ultitube and the mounting bracket, allowing proper alignment and secure installation.
The spacer is placed between the reservoir mount and the bracket, with the mounting screw passing through the spacer.
Features:
Designed specifically for Aquacomputer Ultitube reservoirs
Ensures correct spacing to the mounting bracket
Clean and simple cylindrical spacer design
Suitable for 3D printing (PLA, PETG, ABS)
Note:
This model is a spacer only. Reservoir, bracket, and screws are not included.