Walther PDP Full Size (18rd) Triple Mag Holder - Tape Mount Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a "Duct Type" triple magazine holder designed specifically for Walther PDP Full Size 18-round magazines.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Look on better version of the holder
Walther PDP Full Size (18rd) Triple Mag Holder - Tape Mount Version
This is a "Duct Type" triple magazine holder designed specifically for Walther PDP Full Size 18-round magazines.
This version features a large, flat back surface optimized for high-strength double-sided mounting tape (such as 3M VHB or Gorilla Mounting Tape). It’s the perfect solution for mounting your mags inside a gun safe door, a cabinet, or the side of your desk without the need for screws or drilling.
💎 Design Features
Tape-Optimized Back: The rear surface is perfectly flat and wide to provide maximum surface area for adhesive, ensuring the weight of three fully loaded 18rd mags won't pull it down.
Precision Fit: Specifically clearanced for the Walther PDP Full Size magazines for a smooth "drop-in" feel.
🛠 Hardware / Mounting
Mounting: Designed for high-quality Double-Sided Mounting Tape.
Pro-Tip: Clean both the back of the print and the mounting surface with Isopropyl Alcohol before applying the tape for the strongest possible bond.
🖨 Print Settings
Material: PETG, ABS, or ASA (Recommended). If using PLA, ensure the mounting surface doesn't get too warm, as the weight of the mags could cause the tape to peel or the part to sag over time.
Walls/Perimeters: 3–4 for a rigid frame.
Bottom Layers: 4–5 (This ensures the mounting surface is thick and perfectly flat).
Infill: 15-20% (Gyroid).