SHARKZ... Fun Multipurpose Clips / Holders / Pegs with moving jaws that bite!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Imported from Thingiverse, orignial crated by muzz64
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 28
- Wydruki
- 2
- Wyświetlenia
- 81
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
<<<text and pictures are not mine but reuploaded along with original model and licence, my own comment and pictures will be in the “make” section>>>
Summary
Fun one piece print that can be used for a variety of purposes from holding notes to keeping bags closed and even as pegs for your clothes line (Refer to images).
This is a quick and easy print (as long as your machine does bridges reasonably well) that will come off the build plate ready to bite... refer to the instructions for print details.
Tips: Tips are not expected but are appreciated as they help offset my filament costs as much as anything else. However, as I live outside the USA tips cannot be sent to me via PayPal.Me as that service is not supported in my region and this is beyond Thingverse's control. If you feel like sending a tip please use regular PayPal and send it to [email protected] and, to those who do, thanks in advance!
Instructions
On a Replicator 2 SHARKZ print really well with Raft / Standard 0.20mm Resolution / 4 Shells / 60% infill. No Support.
Using 4 shells and 60% (+) infill makes the SHARKZ strong and ensures a good bite... you can use less shells and less infill but they will be less springy so the bite strength is reduced. SHARKZ should have a strong bite!