DIN Rail Adapter for Meanwell LRS-200-24 for V-Core3 400
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter to hang the Meanwell LRS-200-24 onto the DIN rail of a RatRig V-Core3 400mm
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 202
- Wydruki
- 0
- Wyświetlenia
- 1759
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is an adapter to hang the Meanwell LRS-200-24 onto the DIN rail of a RatRig V-Core3 400mm. It should be printed twice, one mirrored (see picture). It doesn't require supports.
It is designed for the DIN rail distance (137.5mm) between of the DIN rails mounted on the back of a 400mm V-Core3! It will not fit other dimensions of VC3.
It was built around the M4 countersunk screws I had available, 12mm long.
I'm not gonna ask for a coffee, but please make sure you give me a like if you find this model useful.