1 / 3
DIN Rail Adapter for Meanwell RS-25-5
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter to hang the Meanwell RS-25-5 onto the DIN rail.
- Ocena
- 4,4 / 5
- Polubienia
- 66
- Pobrania
- 886
- Wydruki
- 5
- Wyświetlenia
- 2792
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 5) (Komentarze: 15)Remiksy (4)Kolekcje (125)Powiązane
This is an adapter to hang the Meanwell LRS-25-5 onto the DIN rail. I designed it (remixed an classical clamp design by Fabian) for my RatRig V-Core3 400mm.
Print as shown in picture and it not require supports.
I designed it for some M3 screws I had at hand, I think 6mm long ones.
I'm not gonna ask for a coffee, but please make sure you give me a like if you find this model useful.