Qidi Plus4 lid raiser - the bulky one (for Qidi-Box)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
bulky Qidi Plus4 lid raiser after installing the Qidi-Box on top of the lid to compensate the additional weight
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I upgraded my top lid raiser after installing the Qidi-Box on top of the lid. The filament changer adds a lot of weight on the top lid, for PLA the hot air has to leave the print enclosure, therefore the raiser. I designed it much bulkier than other brackets, the weight is transferred directly from the glass to the housing rim. Works fine, i printed it in ASA laying on the side - no support needed. I included step and SolidWorks files, if you want to remix it. Have fun,
Category: 3D Printer Accessories