Loxone Table Lamp Air Wireless Charging Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wireless Charging Extension for a Loxone Table Air
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
An extension for the Loxone Table Lamp Air to enable wireless charging.
For each lamp, you need one wireless charging receiver, one of these extensions, and at least one wireless charging pad.
The extension is designed to fit onto the charging pad, and the lamp is automatically centered.
I used PLA Prusament Galaxy Black and selected the “Fuzzy Skin” option during printing to achieve a more appealing appearance. Additionally, I recommend using the option “Support on build plate only.”
In my case, the lamp fits into this extension in such a way that no glue or similar materials were necessary.
If you have more than one lamp and do not charge all lamps at the same time, you can label the lamps, for example with numbers. I have attached a Fusion 360 file in which you can change the parameter for the character/number.
I used the following Amazon items:
Wireless charging pad:
https://www.amazon.de/dp/B07THHQMHM?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4&th=1Wireless charging receiver:
https://www.amazon.de/dp/B075L6MXJX?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1