1 / 3
Translucent Christmas Snowball for LED Fairy Lights — zdjęcie 1
1 / 3

Translucent Christmas Snowball for LED Fairy Lights

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two part sphere to clamp around micro-LED fairylights on a christmas tree. Translucent and sparkling.

Ocena
0 / 5
Polubienia
1
Pobrania
11
Wydruki
0
Wyświetlenia
62
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This pretty, snowball-like decorative element can be clipped around 1-2 micro LEDs of a fairy lights on the Christmas tree. It appears to float in mid-air, emitting a warm light and sparkles through small holes as you walk past.

Print it twice to create a single snowball. Use white PLA or PLA+ filament with a wall thickness of 1–1.5 mm. There are small holes inside to accommodate two 2 mm x 3 mm neodymium magnets, respectively, which can be glued in to enable the snowball to clamp onto the fairy light cable. You might need a support but usually it works without.

Dieses hübsche, schneeballähnliche Deko-Element kann um 1-2 Mikro-LEDs einer Lichterkette am Weihnachtsbaum geklemmt werden. Es scheint in der Luft zu schweben, strahlt ein warmes Licht aus und funkelt durch kleine Löcher, wenn man daran vorbeigeht.

Drucke es zweimal aus, um einen ganzen Schneeball zu erstellen. Verwende weißes PLA- oder PLA+-Filament mit einer Wandstärke von 1–1,5 mm. Im Inneren befinden sich kleine Löcher für jeweils zwei 2 mm x 3 mm große Neodym-Magnete, die eingeklebt werden können, damit der Schneeball am Lichterkettenkabel befestigt werden kann. Support eventuell benötigt, aber in der Regel funktioniert es auch ohne.

Tagi