Cosplay Finger Claw Blade – Interdigital Mounted Prop (10 cm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Single-piece 3D printable cosplay claw blade designed to mount between two fingers. Approx. 10 cm length
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial
Description:
This model is a single-piece cosplay claw prop blade designed to be worn between two adjacent fingers. The geometry positions the blade along the finger gap, creating an extended silhouette when worn. The model is provided as one solid part with no moving elements.
Usage / Fit:
The claw is worn by sliding it between two fingers. Fit depends on hand size and finger spacing; scaling may be required. Wearing gloves is recommended to improve comfort and stability during use.
Print Notes:
Single-piece model
No assembly required
No hardware included or required
Safety Notes:
This is a cosplay prop and not intended for real-world use.
Sharp-looking geometry may still be uncomfortable when worn directly on bare skin.
For optimal functionality, reduced finger mobility — or a conveniently missing finger — may improve overall user experience.
Use common sense.
Disclaimer:
This text was generated using AI.