Ryan Hall Y'all - Y'all-o-Meter yard mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Press-fit mount for Ryan Hall "Y'all-o-Meter"
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A quickly designed press-fit mount that provides a quick way to stand-up your Y'all-o-Meter in your yard. Holes on the backside are for two of those 10" long, round steel tent stakes you can find at Walmart (or just throw a brick on it). I don't claim this thing will hold up to high winds/blizzard conditions, but you know... for general use it should be fine.
This was designed for the Y'all-o-Meter Mini. I don't know if the other two variants are the same dimensions or not so I can't speak on those. Based on just looking at the images of them, they all appear to be the same width.
Since it'll be outside, suggest printing in PETG at a minimum.
I printed mine at 20% infill, and shouldn't require any supports if printed flat.