1 / 1
3dsets mogster reinforced portal gear
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reinforced portal gear for the 3dsets mogster 4x4 and 6x6
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 405
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (17)Powiązane
I kept breaking the portal gear to wich the tire mounts on my 3dsets mogster. So i added 3 m2x30mm screws (20mm should do it too) to each of them to reinforce it. You have to cut the head off the screw so the tire can still mount.
For the 4x4 mogsters you need 12 m2x30 screws
For the 6x6 mogster you need 18 m2x30 screws