Nations: The Dice Game + Unrest expansion store solution
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fantastic insert in terms of efficiency and ergonomics :)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my favorite game of all time. I created this design in 2018 and published it on BGG. Only after seven years did I publish it on Printables.
The purpose of this project was to reduce setup time and the hassle of handling tiles between eras to an absolute minimum.
Store the progress and score boards on top. Do not pull the printed tray out of the game box! Player mats can be easily pulled out thanks to the side holes in the tray. Keep the rulebook at the bottom when you no longer need it. I store the dice and game chits in two large zip bags because this is more efficient than using any tray.
The project provides trays with 1, 2, 3, 4, or 5 sections. You need to print a total of 5 sections. Choose one of the following variants:
5 sections — if your printer is capable of printing a 263 mm part
4 + 1 sections — if your printer is capable of printing a 208 mm part
3 + 2 sections — if your printer is capable of printing a 157 mm part
It was quite an interesting challenge to design a storage solution for the tetrahedron (solo die). Just drop it into the hole and the die will sit neatly in place. Instructions on how to remove it are provided in the picture. This die became smaller in the second print (2017) than original (2014). Print the corresponding version of token_holder_*.stl