Ski Slope Vignette | No AMS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simplistic ski hill decor perfect for any space. No AMS required!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my take at a simplistic home winter decor print. I wanted to try something a little outside the box and something that I can keep up the whole winter season. This was 100% designed in fusion 360 and it was a real challenge. The slope itself was fairly easy to design, but the low poly rocks and mountains as well as the skier had to be designed in the form environment which was brand new to me. This is made to be printable on at least a 220 by 220 mm print bed and with no AMS system. There is an included file for the mountains that are combined which will not fit on a 220 size bed but if you have a bigger printer it will make it easier and remove the seam in the mountains. See the notes under files for clarification.
Recommended Print Settings:
Infill: Gyroid
Supports: Grid support for mountains, organic for skier
Layer Height: 0.1mm
Walls: 4 loops
Top Layers: 3
Skier Filament Swap Layers I used: 31& 312
Assembly:
It should be self explanatory except for the rocks. I made it so that you can print as many or as few as you want and glue them on wherever you want. Glue is only necessary for the rocks and skier as the diamond pegs should be tight enough to keep the mountains and slope together.
Merry Christmas and Happy Printing!