1 / 11
Accessories for an Autodarts Dartboard on Fibrotech Acoustic Panels including Laser Oche — zdjęcie 1
1 / 11

Accessories for an Autodarts Dartboard on Fibrotech Acoustic Panels including Laser Oche

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a collection of additional parts usefull for an Autodarts enabled Dartboard based on Raspberry Pi.

Ocena
0 / 5
Polubienia
3
Pobrania
15
Wydruki
0
Wyświetlenia
836
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Indoor Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I have built an Autodarts assisted Dartboard setup based on the DIY-version of Autodarts. To make it neat and more usefull, I have created a couple of gadgets to easily fit into the fibrotech acousticpanel grooves for attachement.

Parts include:

Cover for the Raspberry pi

 Cable-clips

A dartsholder for 6 darts

a LASER oche with LiIon battery and USB-C charger + battery protection

a wallmount for a HP foldable laptop (print one side mirrored)

Additional parts needed

LASER-Oche:

9mm 3V Line-LASER from Aliexpress

47Ohm resistor in series with the LASER

18650 LiIon battery with solderingtabs

USB-C charging board TP4056 as on the picture from Aliexpress

Rockerswitch

6 melting inserts M3x4x4.5

M5x16 capscrew

M5 nut

Wireing:

B+ to battery plus

B- to battery minus

Out + to middle pin Rockerswitch

left/richt pin Rockerswitch to resistor

resistor to red wire LASER

black wire LASER to Out -

OpenSCAD file included for easy adaption. Copy abdeckung.scad plus the two logofiles (.svg) in the same directory, open in OpenSCAD and at the end, uncoimment what you want to generate. 

Have fun!

Tagi