LaserTube hanger for lasersaur 14.03
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
replacement parts to hold CO2 laser tube
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Elements used for the Lasersaur project. v14.03
http://www.lasersaur.com/
Laser tube 100W RESI, 80mm diam.
These parts are made as replacement for aluminum part and extrusion assemblies who was not precise enough for me. As soon as I tight the screws, it always move a little bit and I had difficulties to calibrate the optics.
I went form the design of xnaron but then It was too different to modify it so I start from scratch on Fusion360.
The files could be download here http://a360.co/1PEIbkJ
It could be cleaned but work well enough for now ^^
Next step is to edit the Y carts and try to fix the maximum of source of misalignment.
---
note: this is an old project of mine that i'm reposting here
Originaly posted on thingivers in 2016
I still use the lasersaur machine :)