Dettol_HandSoap_Dispenser_ClosingLid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model helps you recycling dettol hand soap container. Only you need to be drilled out to container.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
You will can printing this model without support.
You will want a step drill diameter 26 mm.
Tips for printing:
Filament: PLA
Supports: No!
Layer height: 0.1 mm or 0.15mm
Wall loops: 4
Infill: 15%
Seam position: left or right
Brim: No!
Info‼: Please be careful when removing the Shark from the print bed!
❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.