Snowman Bowl – Winter Smiles for Your Table
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cheerful bowl that brings instant holiday vibes to snacks, candy, nuts—or just as a cute catch-all by the door
- Ocena
- 0 / 5
- Polubienia
- 55
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Snowman Bowl – Winter Smiles for Your Table ⛄✨
A cheerful bowl that brings instant holiday vibes to snacks, candy, nuts—or just as a cute catch-all by the door. The nose, eyes, and smile are separate inserts you glue in, and the scarf is a separate printable base for that cozy look.
What’s in the model 🧩
Bowl with shallow recesses for the face
Scarf base (prints separately; use it as a stand)
Face pieces: 2× eyes, carrot nose, curved mouth (glue-in parts)
Assembly 🔧
Print all parts. Test-fit the face pieces, then glue with a tiny drop of CA/super glue.
Set the bowl on the scarf stand. Leave loose (easy to clean) or add a few dots of glue for a permanent bond.
Optional: add felt pads under the scarf for a soft, non-slip base.
Print tips 🖨
Material: White PLA/PLA+ for the bowl; red for the scarf; black (and gold/orange for the nose) for the face. PETG works too.
Settings: ~0.20 mm layers (go 0.16 mm for extra-smooth curves), 2–3 walls, 10–15% infill.
Orientation: Print the bowl upright; most printers handle the gentle overhang without supports.
If your slicer flags the inner rim, use minimal/trees supports for the inner lip only.
Scarf: print flat; add a small brim to keep the thin tail corners down.
Fit tweaks: scale tiny face parts ±1–2% if needed.
Care & safety 🍬
FDM prints are porous. For food contact, line the bowl with a napkin/liner or seal the interior with a food-safe epoxy. Hand-wash only; no dishwasher, no hot foods or open flames.
Style ideas 🎄
Classic white bowl + red scarf + black face, or try glitter/silk filaments. Scale up for a centerpiece, or down for a candy dish on the desk.