GL.iNet Comet Pro (GL-RM10) Rack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multi-part version of the rack mount provided by GL.iNet for their new Comet pro KVM
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 170
- Wydruki
- 0
- Wyświetlenia
- 1291
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
GL.iNet were amazing and provided rack mount stl files for their new Comet pro KVM, but the file is in one piece an not able to be printed on most home printers, including my H2D. I broke this up so that it could be printed in multiple pieces and included plates to connect and support them.
The plates and the holes are roughly done, make sure the holes line up. The arrow should face towards the back of the mount. Use two plates for each connection, one on top and one on bottom, four (4) plates needed in total.
Use four (4) M3x10mm screws with nuts to secure each connection, eight (8) in total for the entire 1U plate. I used these: M3 x 10mm Hex Socket Head Cap Screws with Nuts
I've only uploaded the 3 KVM variant as that was my use case, but let me know if you'd like the one and two KVM variants added and I'll get those added as well. Happy printing!
EDIT: (12/29/25), Added a plug to fill any unused KVM slots
EDIT: (1/19/26), Added Left/Right and Center blanks so you can house only one or two KVMs in the full 19 in rack mount.