1 / 10
Shortened exhaust duct for new upgraded  K40 Laser, Model 2021 — zdjęcie 1
1 / 10

Shortened exhaust duct for new upgraded K40 Laser, Model 2021

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I received the updated Version of the K40 Laser (Vevor type with digital reading, emergency stop, light). It also had…

Ocena
0 / 5
Polubienia
4
Pobrania
34
Wydruki
0
Wyświetlenia
427
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

I received the updated Version of the K40 Laser (Vevor type with digital reading, emergency stop, light). It also had a new exhaust fan assembly, which is screwed directly to the exhaust duct. To fit the motorized lasertable https://www.thingiverse.com/thing:4066979, you need a shorter exhaust duct.I didn't want to cut the sheetmetal original so I quickly designed a new one. It can be screwed on as is (thread the M4 screws into the plastic) or you can also use meltin inserts for M4 screws as I did.

The exhaust fits on an Ender3 buildplate or anythingthat can handle 200mm width.

OpenSCAD file included as usual for easy adaption in case, China changes something on short notice! ;)

Enjoy!

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

20%

Filament: Noyes PLA aluminium

Category: DIY

Tagi