Riggable Dreidel with Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a dreidel that you can rig and has a stand which can be used as a pot.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a dreidel that can be rigged if you'd like to. The model can be assembled just by pushing the four blocks into the outside of the dreidel body. The proper order for the blocks is Nun, Gimel, Hey, then Shin. I recommend that the infill amount for the blocks should be greater than the infill amount for the body so the dreidel will stop with only one side up. The way you would rig it is either by increasing the infill amount of the block on the opposite side or by stopping the print and manually inserting the blank block on the inside.
Attribution for assets used in the renders:
The desk is based on “Computer Desk” (https://sketchfab.com/3d-models/computer-desk-98c5bd86d7bb4ca98dbc26dabb5e7196) by draakon_4d (https://sketchfab.com/draakon_4d) licensed under CC-BY-4.0 (http://creativecommons.org/licenses/by/4.0/).