1 / 4
Origami tree
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a Christmas tree inspired by the classic Japanese art of origami. It consists of two easy-to-print parts that don't require supports.
It's recommended to use a 0.8 mm or 1.0 mm nozzle with a 0.28 mm layer height and PLA filament, printing in vase mode, solid layers below: 5. If you only have a 0.4 mm nozzle, you can print it without vase mode and add three walls with no infill.
How to assemble it? Glue both parts together. The intention is for it to be a simple model to print; we won't have to adjust tolerances or calibrations, nor adjust our horizontal expansion on the slicer, just a little cyanoacrylate or silicone.
It should be clarified that the base is not necessary; you can print only the tree.