Case for remote control Hörmann HSE2-868-BS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update as of August 16, 2021: Updated the files. the original upper part had a flaw where the pins under the buttons…
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 1045
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Update as of August 16, 2021:
Updated the files. the original upper part had a flaw where the pins under the buttons were floating in midair. This is corrected now. Should prind no problem!
Thanks to @mrBira for the heads up!
Replacement for broken case of Hörmann HSE2-868-BS.
Usually, case breaks and electronics are still ok. So here is your sparepart!
2 versions: one with keyring, one without keyring.
Two halves are pressfit. No screws, just snap-in
enjoy!.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20
Filament: Noyes PLA Black
Category: Replacement Parts