42mm round hygrometer 2 way side mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 2 way (vertical or horizontal) side mount bracket for the typical round hygrometer that need a 42mm hole.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a 2 way (vertical or horizontal) side mount bracket for the typical round hygrometer that need a 42mm hole. Made this for use with the ezystorage 79-Quart Waterproof Clear Latching Gasket Tote I use for storing filament. (FYI you can get 16 standard 1kg rolls stacked vertically as shown and likely another 8 horizonal on top. Have not tested the horizonal layer yet.)
When vertical the hygrometer is viewable from outside the container (if the container is clear). In horizonal mode the hygrometer is viewable from above. the hygrometer holder can be slid out of the mount for service or reorienting.
Printing I used PETg, 0.20mm speed profile, 15% infill, and organic supports "everywhere"
Installing I used some 3M VHB double sided foam tape to stick the mount to the wall of the container.